Friday, April 11, 2014

Processing, spinning and knitting milkweed fiber

 
The milkweed plant produces a fiber that can be used by spinners. Fibers from hemp, flax, dogbane, milkweed and nettle have been used for thousands of years to produce textiles, cordage, netting, etc.
 
I've been wanting to try my hand at getting fibers from milkweed, processing them, and spinning them. I finally had the time to give it a try, so I went to glean a few stalks from an area that I know had milkweed growing last summer.
 
I gathered around twenty or so stalks that had been sitting in situ after dying off last fall. If you gather milkweed and nettle in the early spring, after the dead stalks have been sitting out all winter, it saves you the trouble of retting.
 
The stalks have a pithy core, with the fiber and the 'bark surrounding it. At this stage, after sitting out in the elements, the stalks break easily and it's easy to dislodge the pithy core from the bark/fiber layer. There are several YouTube videos that show this process for nettles.
 
Below, you can see the core to the left, and the bark/fiber layer peeling off to the right. The fibers are shiny and white: 

 

After peeling the outer layer off of all of my stalks, I had a small pile of fibery bark:


 
So here's the problem, how to release the wonderful, white, shiny fiber from the thin layer of bark? I don't know. I'm sure there is a way. It might involve breaking it in a manner similar to breaking flax. I do have a flax break, but I wasn't sure the milkweed would stand up to the flax break. I may try that next time. What I ended up doing was carding the bark/fiber. Most of the bark is broken up and falls away, but the fiber is also broken, and not all of the bark is released. It was heart breaking to break all of that wonderful, long shiny fiber up. I will research/experiment with other methods next time.
 
So here is what the carded milkweed fiber looks like in a rolag:
 

 
I ended up with about 0.7 ounces of carded fiber from those twenty some-odd stalks:
 

 
I split that up so that I could spin two bobbins and ply them together. The spinning was challenging, it's not an easy fiber to spin in this condition, but I got it done. Here is the two-ply on the wheel:
 
 

 
I ended up with about 17 yards of sport-weight, two-ply yarn:
 
 
I washed the yarn vigorously with hot water and soap. I know that linen yarn benefits from washing in hot water, and even boiling with washing soda (which I've done with my own linen yarn). I'm sure that this would clean up and lighten up even more with such treatment, but after just a couple of vigorous washings, and letting it dry,  I wound it into a center-pull ball for knitting:
 


 Like linen, it's a bit on the stiff side, but softens up with washings, and I'm sure with wear, too.

So I ended up knitting a little swatch, about 2.5" x 4" in size:



 
I'll probably fold it over, add a crocheted edge while binding two sides together, and keep the top open to make a small pouch to hold my stitch markers.
 
 
This was an interesting process. I hope to find out how to extract the fibers without breaking them all up with carding. As it is, I think this yarn is not very strong - certainly not nearly as strong as linen. Hopefully, if I can figure out how retain a nice length on the fibers, I can make a prettier, stronger, and finer yarn from milkweed in the future.
 
Okay, here is the finished pouch:
 
 
 
It's small, but a nice size to hold stitch markers:
 

 
 
From plant to pouch took about a day and a half. Looking forward to repeating with hopefully even better results in the future.



14 comments:

deb frazier said...

I'm also trying to process milkweed fiber. There is an article in an old issue of Spin Off that gives directions on how to get the "gum" off of the fibers so they are smooth and soft. They boiled the fibers in lye, soap and water, then carded them after drying. If you want the specific instructions from the issue, email me, I'd be happy to share.
Deb Frazier
deb@debfdesigns.com

PsyckoSama said...

Try leaving the milk weed, stalks and all to sit in water for several weeks to months. The ideally, the bark and wood will break down leaving just the fibers.

All you'd need to do is leave a plastic container in the far shaded corner of your yard with the lid lifted on a corner to make sure that there is some form of air flow the come back to it some time in August

ICQB said...

Hi Deb,

Thanks, I'll contact you.

ICQB said...

Hi PsyckoSama,

Thanks for the tip!

Anonymous said...

I am giving a talk on fibers traditionally used in the Four Corners area (Colorado, Utah, New Mexico and Arizona) and I would love to find samples of prepared fibers. I have yucca, but I need dogbane and milkweed. Does anyone know of any sources? I do not have time to prepare my own. Thank you!

ICQB said...

Hi Anonymous!

I found a site that says it sells dogbane stalks. Copy the address and then paste it into your browser, then scroll all the way to the bottom of the page: http://www.primitiveways.com/cordage_video.html

Good luck!

jacqsierae said...

That's a long process...but worth the effort. Thank you!

ICQB said...

Hi jacqsierae!

You're welcome!

Unknown said...

3 seasons I have harvested wood nettle for cordage making, and experimened a litte with milkweed. Letting the stalks over winter does make it easy to remove the fibres from the pith. The problem that I have noticed the last 2 seasons is black mold, and maybe bacteria degraded the fibres. As I am peeling the skin off, the fibres would break apart.

ICQB said...

Hi, Unknown!

Yes, I think that is a downside to collecting over-wintered stalks. Also, I have found grabs inside the stalks sometimes.

ICQB said...

That’s grubs, not grabs.

Kate Boyington said...

I watched a woman peel the outer bark away when the milkweed plant was green. She scored the length of the stalk with a push pin 2 or three times and then peeled the bark off. She then took the next layer and carefully peeled it back and it looked just like flax that had already been hackled. So shiny and soft it was! After she peeled this layer away all that was left was the inner core. She hung the flax type fiber over a drying rack and then she worked at splitting the strips of fiber into thread. The threads were as long as the stalk. Some did break, but they were more than long enough to spin. Also the outer bark of the stalk was twisted into a strong 2 ply cord to be used for tying up things in the garden or around the house.I also wanted to suggest trying retting the stalks plant fibers hate being dry. It's completely against their nature which is to catch moisture and disperse it where needed. My great great grandmother passe down some hints for spinning what she called bast fibers. She said they always like to be wet until they are in place. And by wet she meant slightly damp. She said if you spin bast fibers dry, you will get a lot of fiber breakage. I'm going to experiment with this too. Thanks so much for your well written article.

Unknown said...

Hi Kate,
Thanks for your comment! I will have to give this a try, too, once I get some milkweed established in my own garden. And thanks for the hints from your great great grandmother. I know I always spin my flax wet, it's much easier to handle that way.

Anonymous said...

Have tried before and gave up as a kid. Kate , is there a link to woman who did the milkweed processing? Did see Sally Pointer on YT who used a butter knife to peel green outside off and broke inner pith to peel fibers off center pith area. Thanks for info. Saw Sara Swett had some very clean fiber she spun and will go see if she posted how to. Wish she had a video of it.
LD